Closeout pass for the G-series 3-ladder chirp + adaptive-escalation work.
Cleanup, watchdog/fallback, lint, full regression — final sign-off.
Cleanup + watchdog/fallback: already wired during earlier audit waves
(track watchdog in chirp_scheduler RP_DEF_TRACK_WATCHDOG_FRAMES, RESERVED
fallback in plfm_chirp_controller_v2, range-decim watchdog in
radar_system_top with gpio_dig7 surfacing, F-3.* MCU error path).
Verified — no residual TODO/FIXME in production RTL or MCU.
Regression infra: tb/cosim/compare_independent.py SKIP-detection bug —
importlib.util.find_spec("scipy.signal") raises ModuleNotFoundError when
the parent scipy package is itself absent (instead of returning None as
the surrounding logic assumed). Wrap in try/except so the regression
runner gets the intended rc=2 SKIP marker rather than a crash that masks
the rest of the script.
Lint sweep: ruff full-repo → 0 errors. Two changes:
- pyproject.toml broadens 5_Simulations/Antenna/**.py exemption from
just T20+ERA to the full set of script-ergonomics rules
(RUF001/002/003 Greek µ/λ/π/θ in physical-units strings, E501 long
matplotlib/numpy lines, RUF005/015/046, E70x one-line setup, B007
tuple-unpack loop vars, B905, BLE001 diag try/except, C401, RET504,
SIM118, PERF40x, ARG001, E402). These are sim/analysis scripts, not
production code — keep substantive bug rules (F unused, B core
bugbears) but drop stylistic noise.
- Auto-fix sweep: 31x F541 (f-string-no-placeholder), 3x F401 (unused
sys import), 2x F841 (dead leftover ref_pat / phases_quant in
array_factor_adar1000_aeris10.py).
.gitignore: cover 9_Firmware/9_2_FPGA/tb/cosim/mf_chain_autocorr.csv
(matched_filter cosim writes here now; was already covered for tb/ but
not tb/cosim/).
Regression baseline (radar_venv):
FPGA : 42/43 — 1 pre-existing T-6 drift cosim fail surfaced by the
SKIP fix above. Three sub-checks now red because PR-O moved
xFFT/MF chain to LogiCORE v9.1 *Scaled* mode (1/2 per stage,
1/2^11 total for N=2048) but compare_independent.py's invariants
(FFT-impulse uniform-spectrum, MF peak-at-injected-delay, MF
peak/median ≥ 5) were written assuming UNSCALED FFT. Not
introduced by this PR — was hidden by the SKIP-detection crash.
Defer to PR-M.4: redesign T-6 invariants (or input amplitudes)
to match scaled-mode arithmetic.
MCU : 34/34 binary suites pass.
GUI : test_v7 150/150 pass.
uv.lock: scipy resolution catch-up (declared in pyproject dev group all
along; lock just hadn't been refreshed after pyproject edits landed).
Bench-side checks: none — this PR is repo hygiene, no firmware/RTL
behaviour change.
Previously the array sim only excited a single inner element
(DRIVEN_X / DRIVEN_Y). Adds DRIVEN_PORTS env var accepting a
comma/semicolon-separated list of "i,j" pairs that are all excited
in-phase with equal amplitude — models a perfect 1:N corporate
splitter feeding an N-patch sub-array.
Example: DRIVEN_PORTS="0,0;1,0;2,0;3,0;0,1;1,1;2,1;3,1" excites a
4-cols × 2-rows sub-array anchored in the corner.
S-parameter post-processing reframed for the multi-driven case:
each excited port reports active-S11 (uf_ref/uf_inc with all driven
ports active); each non-excited port reports S relative to a
representative driven port's incident wave (all driven ports have
equal amplitude so any reference works).
Backwards-compatible: empty DRIVEN_PORTS reverts to single-port
DRIVEN_X / DRIVEN_Y behaviour.
Single-port-driven, 15-port-terminated FDTD sim built on the same v3 patch
design point (W=7.854, L=6.56, FEED_OFFSET=2.14) at the Gerber pitch
(14.27 mm X / 15.01 mm Y). Reads out S_jd for all elements when port
(DRIVEN_X, DRIVEN_Y) is excited. Configurable array size + driven port via
env vars; default = 4x4, drive inner element (1,1).
Result at PROFILE=balanced, drive (1,1):
Active S11 @ 10.5 GHz : -16.7 dB, Z = 45.7 + j13.5 Ω
Active -10 dB BW : 190 MHz (10.44-10.63 GHz; ≈ single-element 180)
Nearest-neighbour coupling:
-x edge neighbour (0,1): -18.3 dB (strongest — edge element loads less)
-y/+y in-array : -22 dB
+x interior neighbour : -24.7 dB
Diagonal : -32 dB
Far corners : -45 to -53 dB
Outputs: coupling_grid.png heatmap + S_matrix.csv (all S_jd full sweep) +
S11_data.csv (driven-port only).
Known limitation: port box must align with mesh lines; SmoothMeshLines may
sub-cell-shift seed lines, causing some DRIVEN_X/DRIVEN_Y choices to give
"Unused primitive" warning + zero excitation. Default (1,1) is verified;
other choices are best-effort. Documented inline.
